21 february 2016
Today the right side of frame 10 put on the keel and firmly put on the mold. Then I put together the elements of frame 9. After the left of frame 9 was ready and 'dry fit' has been put in place, I started to fit the upper part to the lower part.
Frame 9 must be ready this week.
_______________
Regards,
Henk
20 february 2016
It is going well than thought. Frame 11 is placed yesterday against the keel. Today it is the left hand part of frame 10 is also placed against the keel.
The right part is drying now and go against it tomorrow
_______________
Regards,
Henk
17 february 2016
We are back on steam. Frame 12 is made whole again and is back in place. It gives an extra boost to correct an error. Just to have everything under control again.
I am satisfied with the curve. Today started with frame 11, it can be installed this weekend against the keel.
_______________
Regards,
Henk
14 february 2016
After frame 9 and 10 were ready, I found out a few small errors in the drawing. The curves do not match. I had to change the mold.
I removed also frame 11 and 12 removed from the keel, because the curves there also were not good.
_______________
Regards,
Henk
7 february 2016
Yesterday and today I built on frame 11 and 12. They are already placed on the keel. Next week I'm going to start with the double frame 9 and 10. From frame 10 I'm going to build both sides closed. By closing both sides from frame 10, this gives the possibility to display the whole inside of bow.
_______________
Regards,
Henk
5 february 2016
Last week I built, in the quiet hours, the frames 13 and 14. They are together the double frame section Z.
On to frames 11 and 12.
_______________
Regards,
Henk
30 januari 2016
Today I have all parts of the frames 15 and 16 placed on the keel. In total there are 61 frames of 149 frames ready, she begins, at least for me, to be more beautiful.
I made the last shot of the side to give a picture of how you later can seer all the decks of the ship, from inside. Tomorrow I'm going to start with the double frame section Z (frame 13 and 14).
_______________
Regards,
Henk
29 januari 2016
At this time, frame 15 and 16 put together. Tomorrow is ready frame 16. As it looks now, this weeken both frames are placed against the keel.
_______________
Regards,
Henk
24 januari 2016
Last weekend I made the double frame of Section X. This afternoon everything sanded and both halves placed against the keel. So we are going steadily towards the bow.
The lady meanwhile starting to get all her curves on the inside. I took a picture of the side. in this picture the shape is clearly visible.
Upcoming days I'm going to draw the parts of frames 15 and 16.
_______________
Regards,
Henk